Most Modern Bright Steel Production
Our plants operate modern integrated bright steel lines.
Peeling – in the high-performance peeling line, with a capacity of 250 MT per month, bars are peeled to ISO 9 tolerances and straightened to bright steel of absolute concentricity.
Wire Rods – Our wire rod line consists of machines where coils can be drawn from coil to coil (for diameters between 5 mm to 20 mm) or drawn & straightened from coil to bars (for diameters between 6 mm to 25 mm).
Drawing – several draw benches are available to produce bright bars ranging from 14mm to 75mm.
Grinding – the production of bars are aided by straightening and coarse grinding machines. Subsequent grinding lines permit the production of ground bars with sizes verified online at tolerances of ISO 6 and achievable roughness of <4 um.
Moreover, our units are equipped for machining the ends of the bright steel bars. We can supply bars with band-saw cutting on each end for maintaining tight tolerance specifications and also chamfered bars for direct use in production.
Capacity
Bright Bars
| Size : | Rounds – 14mm to 75mm Hexagons – 12mm to 48mm Squares – 12mm to 48mm |
| Surface Finish : | Peeled, ISO 11 Peeled & polished, ISO 9 Peeled & ground, ISO 6 Peeled, ground & polished, ISO 9 Drawn, IT 9 Drawn, ground and ground / polished, IT 7 |
| End Finish : | Hot Cut Cold Cut Champhered – 30o, 45o, 60o |
| Bundling : | 1 MT max ; less than 1 MT upon request |
| Capacity : | 700 MT / month |
Bright Rods from Wire Rods
| Size : | Rounds – 2mm to 26mm Hexagons – 2mm to 18mm Squares – 2mm to 20mm Octagonal – 2mm to 22mm |
| Surface Finish : | Rounds – Drawn, IT 9 Rounds – Drawn, ground and ground / polished, IT 7 Rounds – Straightened according to DIN EN 10060 Squares – Drawn, IT 11 Hexagons – Drawn, IT 12 Octagonal – Drawn, IT 11 |
| Length : | According to requirements ; ranging from 2000 mm to 6050 mm |
| Bundling : | 1 MT max ; less than 1 MT upon request |
| Capacity : | 600 MT / month |
Steel Service Centre
We also operate a steel service centre with Cut-To-Length and Slitting Lines for processing CR / GI / GP / Colour Coated / SS Coils. The installed capacity is 5,500 MT per month.
Cut-To-Length Line
| Type of Materials : | Cold Rolled Steel, Galvanised Steel, Colour-coated Steel & Stainless Steel. |
| Width of Coils : | 1500mm |
| Thickness : | 0.5mm to 4.5mm |
| Coil Weight : | 25 MT max |
| Sheet Length : | 200 mm to 6000 mm |
| Length Tolerance : | +/- 0.5mm |
| Line Speed : | 15 to 35 meters per minute |
Slitting Line
| Type of Materials : | Cold Rolled Steel, Galvanised Steel, Colour-coated Steel & Stainless Steel. |
| Thickness : | 0.3 mm to 3.0 mm |
| Width : | 1600 mm |
| Coil ID : | 500 to 560 mm |
| Coil OD : | 800 mm to 2000 mm |
| Coil Weight : | 15 MT max |
| Slitting Width : | 30 mm minimum |
| No. of Slits : | 10 cuts for thickness upto 2 mm, 6 cuts for thickness upto 3 mm |
| Width Tolerance : | +/- 0.20 mm |
| Line Speed : | 35 to 65 meters per minute |